CNC Hydraulic Press Brake/Bending Machine
CNC Hydraulic Press Brake/Bending Machine With
Delem Controller
Main Performance
The frame
of machine is composed of tank, worktable, left and right housings and ram.
So it has high strength and good rigidity. Also it takes vibration to
eliminate stress.
Synchronization working principal of
both machines:Adopting electric-hydraulic proportional valve to ensure the
synchronization of both machines. The proportional valve is made by BOSCH
company with very good performance such as small friction between mechanic
action pairs, fine electronic amplifier and electric magnet with high
controlling force and continuous action. There are two raster displayers on
both sides of machine to inspect the position of ram continuously and feed
back the signal to control system, then the control system will control
electric-hydraulic valve to make two cylinders synchronization on one
machine. Because the raster displayers are installed to “C”
plates, not on housing plates directly, the deflection of ram and frame when
working will not effect its measuring and controlling precision. When two
machines working together, the differential potentiometer installed between
two machines will transfer the mechanic synchronizing signal into electronic
one and feed back to synchronization plate and control system. The signal
will be enlarged by BOSCH amplifier to control the synchronization of both
machines by controlling electric-hydraulic proportional valve. So the
synchronization of two machines is achieved with high precision.
Through computer,the operator could
communicate with machine. The computer has several service language,
calculate and adjust the bending force automatically. Also it could
calculate and control the dead point, speed changing point.The strokes (Y1,
Y2) of ram could make a small tilt to meet the special requirement of user.
Equipped with good guiding system,
position measuring system and hydraulic balance system to meet the
requirements of full length job and eccentric job.
Worktable compensation unit is
adopted to make up for deflection of machine when working to make sure the
precision of work piece.
The surface of cylinder has good
wearing and heat treatment, so it has good lubrication and long service
life.
Main Feature
- Totallly EU standard design,
monoblock by welding robots& apparatus and stress relief process by
annealing treatment.
- Primapress engineers utilize
parametric 3D Slid works using FEM & DOE analysis as well as static
and mechanical analysis.
- Adopt integrated hydraulic
system, more reliable and easy for maintenance and the hydraulic system
from Bosch-Rexroth, Germany.
- Mechanical synchronous
mechanism and the complex compensation are designed so as to raise the
workpieces precision.
- The stroke and distance of
the backgauge is adjustable by the motor and is well adjusted by hand,
the adjustment is displayed by digital meters.
- Inch, single, continuous
operation mode being designed for the machine and reversing and maintain
time cane be controlled by the time relays.
- Safe fence and the electric
interlocer have been designed for the machine to ensure the operation
safety.